|
Author
|
Topic: How do you capture in Mpeg 1?
|
Mongoo
|
posted 12-22-2000 02:39 AM
Hi, heres what I need to do. I need to capture 2 hours of video and put it on a CD. It needs to be in Mpeg 1 format. I'm looking around for ways to do this, and it'ld make it alot easyer and less time consumeing if I could just capture the video in Mpeg 1 format instead of haveing to convert it. Any help or direction would be greatly appreciated. Thanks.Mongoo |
Cold_as_ICE
|
posted 12-23-2000 12:32 PM
How you capture your footage is dependant upon your capture card. I use the DVRex M1 and it captures in avi fomat so I have to convert to MPEG later. Check the specs on your card.ICE
|
sp70mm
|
posted 12-23-2000 04:37 PM
I'm not sure it's even possible to capture in MPEG-1 because of the enourmous amount of computer power it takes to convert something into the mp1 codec. Check www.videoguys.com they have detailed specs on all caputer utilites and hardware. I think there is a lowergrade system (Dazzle?) that is based on mp1, but I could be wrong.------------------
Sp70mm "My Reflection, Dirty Mirror..."
-Billy Corgan, 1995 |
filmguy15
|
posted 12-24-2000 01:24 PM
Don't get Dazzle! the capture "device" is ok but the software is junk!-Chase ------------------
Please visit our website here L&W Productions |
jeeroome
|
posted 12-24-2000 01:37 PM
I think that the MP10 card from Pinnacle lets you do that at low res.
Check if I'm right at www.pinnaclesys.com Good luck!  |
